+ 450 watts per channel (4ohm)
+ Compatible with 2 ohm loudspeaker impedances
+ Full Balanced Topology
+ Completely symmetrical circuit design
+ Dual oversized toroidal transformers
+ Advanced optically coupled protection for each channel
+ Thermal protection from overheating
+ Loudspeaker protection from DC and frequencies below 10Hz
+ Protection against short-circuits, device failures, miswiring and internal faults
+ Stable with mismatched, reactive or unusual loads
+ Large heat-sinks for silent convection cooling
+ Balanced & single-ended input connectors
+ Trigger input for power control from an external device
+ 4 hand-graded outputs per channel
+ High power-supply voltage for extra headroom at the outputs
+ Heavy-duty gold plated output connectors
+ Rack mount option will be available
Thông số kỹ thuật:
| Inputs: | 7 RCA, 7 XLR |
| Outputs: | 7 pairs of gold-plated binding posts |
| Output Power: | 300W RMS per channel into 8 from 20Hz to 20kHz |
| Frequency Response: | 20Hz to 20kHz +0.1dB/-0.2dB |
| THD: | Less than 0.05% at full rated FTC power 20Hz to 20kHz Less than 0.005% at full FTC power at 1kHz |
| Signal-to-Noise Ratio: | Greater than -110dB below rated full rated power A-weighted |
| IM Distortion: | Less than 0.03% at full rated power |
| Crosstalk: | Greater than -80dB @ 1kHz (30kHz bandwidth) |
| Damping Factor: | Greater than 200 @ 20Hz (ref 8 ) |
| Input Sensitivity: | 2 volts for 300W out into 8 |
| Input Impedance: | Minimum 10K |
| Gain: | 28dB ± 0.5dB |
| Trigger Input: | 3.3V minimum - 24V maximum DC |
| Power Requirements: | Two circuits each rated 120VAC 12A or one circuit rated 230VAC 8A 50/60Hz |
| Dimensions (H x W x D): | 221 x 440 x 516 mm |
| Weight: | 65.2 kg |
0 nhận xét:
Đăng nhận xét